Demountable Partition Walls
Panel Wall Gallery:
Extrutech Plastics, Inc. Demountable Walls provide a flexible option for food processors that need to limit access or separate work areas from cross-contamination. They are also used in car washes as partition walls helping to keep the spray out of the drying area. Demountable walls can be pre-assembled to the customers’ requirements, knocked down for shipping and ready for installation at the customer's site that can later be reconfigured to meet changing needs. Demountable wall panels (Item# EPI9000) are 36" by 1 3/4" thick, are cut to the customers requested length, and available with many options.
EPI9000 Wall System (PDF - 94KB)
Extrutech Wall Panel System uses the EPI9000 36" inch wide by 1 3/4" thick wall panel, that provides a quick and easy installation. Have a smooth glossy surface on both sides that helps improve overall reflective lighting. Can be insulated or add internal steel reinforcement for additional support and cut to the requested length, up to 20' feet long. The interior structure of this dovetailed interlocking panel is of a multi-chamber structure of 36 1" x 1 3/4" chambers the length of the panel with an external wall thickness of .070". Made with 100% virgin, exterior-grade PVC and has a Class C rating and will not support mold or mildew per ASTM D3273 and D3274.
The Extrutech EPI9000-36" wide panel at the left shows a sample of inserts that can be fitted into the panel for different needs and applications. It shows PVC inserts, for use for mounting and stiffness; Steel inserts, for structure stiffness and Insulation inserts to provide insulation value. Standard shallow electrical boxes can also be inserted into the panels with the chambers above the boxes used as electrical chases. With a number of additional trim options shown below such as the PVC Channel and Stainless Steel channel shown on the panel, there are also panel extensions, corners and additional trims to cover most applications.
Panel Extensions & Trims
Start with the Installation of EPI0100 or the SS U-Channel to the floor with a concrete fastener.
Join the wall panels together with the 2 connector EPI1020 from the top down.
You can also use the EPI0200 H-Bar to connect the panels together if access form the top of the panels is limited.
At the corners you can use the EPI1090 as shown or the EPI1095 if access from the top is limited.
The top of the panels are capped with EPI0100 Rigid U-Channel or you can also use the EPI0110 with it's one flexible leg, that can be folded over the wall panel, fasten in place with stainless steel screws.