Contact us Today: 888.818.0118

Extrutech Concrete FORM Panel Systems

Photo Gallery:    

 Extrutech Stay-in-Place Concrete FORM Wall System
 
 Extrutech Plastics, Inc.'s
FORM is a "stay in place" concrete form for 6" and 8" poured concrete walls. Each FORM panel is 2' feet wide, 6" or 8" thick, cut to the inch lengths up to 20' long or pre-cut to project specifications and shipped as a kit to your jobsite.

Extrutech Plastics, Inc. brings a bright new face to concrete form construction by combining standard concrete form methods with the easy-to-clean, sanitary surface that Extrutech panels have always provided. This versatile, builder-friendly system features a two-foot wide, six inch thick precut panel that snaps together and locks in place using a double-spline E-Locking System. This creates a structural wall system that is a time-saver for both contractor and client, resulting in a bright white, sanitary, easy-to-clean finished wall.

Extrutech FORM System features a double-spline, male/female interlocking joints and strong honeycomb interior walls designed to provide maximum panel stability.

The Extrutech FORM panels lock together with a overlapping joint and use a double spline E-Locking System that allows the panel to be joint together side by side, without having to lift one panel over the other or slide one panel down the edge of another.

The Extrutech FORM System is listed under the following patents:

                 U.S. PATENT  8,677,713                    CANADIAN PATENT  2833,490                  MEXICAN PATENT  344648

Advantages:

  • Quick installation
  • Never needs paint
  • Fewer Seams - 2' wide panels
  • Custom cut panel kits to 20'
  • Snap together double spline, E-Locking System
  • Standard rebar reinforcing methods apply
  • Water and corrosion-proof
  • Cleans easily - low maintenance
  • Panels will not rust, rot, or flake
  • Resists mold, mildew, bacteria growth
  • Brightens the interior of any building
  • Available in a bright white, high gloss surface
  • Low maintenance, easy-to-clean, with water/mild cleaner
  • Protective film on both sides keeps panels clean during construction
     

        PRESS RELEASE 2018 - EXTRUTECH Announces Production of FORM House

        NEW PRODUCT   _   EXTRUTECH FORM Housing Structures  _

Recommended Use:

For any area that requires easy-to-clean concrete structural walls such as:

  • Dairy Barns
  • Cheese Plants
  • Bottling Plants
  • Milking Parlors
  • Food Processing
  • Cold Storage
  • Car Washes
  • Clean Rooms
  • Laboratories

Request Information

HOW TO VIDEO:   Extrutech Concrete FORM "HOW TO" Video  

 PDF  Extrutech Step-By-Step Installation (PDF - 5.4MB)
 PDF Extrutech FORM System Installation Guide (PDF - 254KB)
PDF Extrutech FORM Lit (PDF - 364KB)
PDF Extrutech FORM System - Guide Specification (PDF - 96KB)
PDF 10 Year Warranty for White Paneling with All Color One Year (PDF - 79KB)
PDF Extrutech Form Panel Bracing Details (PDF - 348KB)
PDF Cleaning and Maintenance Dec 2014 (PDF - 115KB)
 

Panel Options

Extrutech 8" Inch Thick FORM Panel - Gives you the extra thickness for larger jobs

This concrete FORM panel is a large, tough, quick setup panel, with snap together edges that form a strong, straight, flat, pre-finished wall, greatly reducing your setup and finishing time. Each 8" thick by 24" inches wide panel can be cut to the inch to lengths up to 20' long or pre-cut to project specifications for windows and doors; and shipped as a kit to your jobsite. For more information on this system Contact one of our sales people for more details, pricing and options.

 

The Two Foot Wide, 8" Thick FORM Panel can also be insulated to meet your needs

Extrutech 8" thick Form panel can also be insulated with 2" of insulated foam for R-14. Brick and stone masonry may be added to exterior, to enhance the buildings appearance.

Exterior Options Available

EXTRUTECH EXTERIOR THIN BRICK OPTIONS

Applied directory to the surface of the panel, we have a large number of: patterns, sizes, and colors available in individual panel sizes to cover large areas quickly.

Extrutech FORM Panel Locking

The Extrutech FORM panels lock together with a overlapping joint and use a double spline E-Locking System that allows the panel to be joint together side by side, without having to lift one panel over the other or slide one panel down the edge of another. Extrutech FORM Corner Detail locked together with the double spline E-Locking System.

Note: Two spline inserts are required at each joint.


Get Adobe Reader

^